TELTONIKA RUTX10 Industrial Ethernet WiFi Router (RUTX10000300)

Name: TELTONIKA RUTX10 Industrial Ethernet WiFi Router (RUTX10000300) - T.I Digital Solution LTD
Brand: simple
SKU: RUTX10000300
Availability: OutOfStock

Write a review below |

 5/5

SKU: RUTX10000300

Call For Price

DISCOUNTED QUOTE

Want it by Tomorrow? Order before 4:00 PM for Next Business Day Delivery.

Availability

Out of stock

Condition New

Out of stock

Description
Reviews (0)

TELTONIKA RUTX10 Industrial Ethernet WiFi Router – RUTX10000300

Specifications

Ethernet
WAN	1 x WAN port (can be configured as LAN) 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover
LAN	3 x LAN ports, 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover
Wireless
Wireless Mode	802.11b/g/n/ac Wave 2 (WiFi 5) with data transmission rates up to 867 Mbps (Dual Band, MU-MIMO), 802.11r fast transition, Access Point (AP), Station (STA)
WiFi Security	WPA3-EAP, WPA3-SAE, WPA2-Enterprise-PEAP, WPA2-PSK, WEP; AES-CCMP, TKIP, Auto Cipher modes, client separation
ESSID	ESSID stealth mode
Wireless Hotspot	Captive portal (Hotspot), internal/external Radius server, built in customizable landing page
Bluetooth
Bluetooth 4.0	Bluetooth low energy (LE) for short range communication
Network
Routing	Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2 EIGRP, NHRP)
Network protocols	TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SNMP, MQTT, Wake on LAN (WOL), DLNA
VoIP passthrough support	H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets
Connection monitoring	Ping Reboot, Wget reboot, periodic reboot, LCP and ICMP for link inspection
Firewall	Port forwards, traffic rules, custom rules
DHCP	Static and dynamic IP allocation, DHCP Relay, Relayd
QoS/Smart Queue Management (SQM)	Traffic priority queuing by source/destination, service, protocol or port
DDNS	More than 25 service providers are supported, others can be configured manually
Network backup	VRRP
Hotspot	Internal/external Radius server, captive portal, built-in custom landing page
SSHFS	Possibility to mount remote file system via SSH protocol
Security
Authentication	Pre-shared key, digital certificates, X.509 certificates
Firewall	Pre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T
Attack prevention	DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)
VLAN	Port and tag based VLAN separation
WEB filter	Blacklist for blocking out unwanted websites, Whitelist for specifying allowed sites only
Access control	Flexible access control of TCP, UDP, ICMP packets, MAC address filter
VPN
OpenVPN	Multiple clients and a server can run simultaneously, 12 encryption methods
OpenVPN Encryption	DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC
IPsec	IKEv1, IKEv2, with 5 encryption methods for IPsec (DES, 3DES, AES128, AES192, AES256)
GRE	GRE Tunnel
PPTP, L2TP	Cleint/Server instances can run simultaneously, L2TPv3 support
Stunnel	Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code
DMVPN	Method of building scalable IPsec VPNs
SSTP	SSTP client instance support
ZeroTier	ZeroTier VPN client support
WireGuard	WireGuard VPN client and server support
MODBUS
MODBUS TCP Slave
ID filtering	Respond to one ID in range [1;255] or any
Allow remote access	Allow access through WAN
Custom registers	MODBUS TCP custom register block, which allows to read/write to a file inside the router, and can be used to extend MODBUS TCP slave functionality
MODBUS TCP Master
Supported functions	01, 02, 03, 04, 05, 06, 15, 16
Supported data formats	8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII
MQTT Gateway
Gateway	Allows sending command and receiving data from MODBUS Master through MQTT broker
DNP3
Support modes	TCP Master, DNP3 Outstation
Data to Server
Protocols	HTTP(S), MQTT, Azure MQTT, Kinesis
Monitoring and Management
WEB UI	HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, event log, system log, kernel log
FOTA	Firmware update from server, automatic notification
SSH	SSH (v1, v2)
TR-069	OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly teach, AVSystem
MQTT	MQTT Broker, MQTT publisher
SNMP	SNMP (v1, v2, v3), SNMP trap
JSON-RPC	Management API over HTTP/HTTPS
MODBUS	MODBUS TCP status/control
RMS	Teltonika Remote Management System (RMS)
System Characteristics
CPI	Quad-core ARM Cortex A7, 717MHz
RAM	256 MB, DDR3
FLASH storage	256 MB, SPI Flash
Firmware/Configuration
WEB UI	Update FW from file, check FW on server, configuration profiles, configuration backup
FOTA	Update FW/configuration from server
RMS	Update FW/configurations for multiple devices at once
Keep settings	Update FW without losing current configuration
Firmware Customisation
Operating system	RutOS (OpenWrt base Linux OS)
Supported languages	Busybox shell, Lua, C, C++
Development tools	SDK package with build environment provided
USB
Data rate	USB 2.0
Applications	Samba share, USB-to-serial
External devices	Possibility to connect external HDD, flash drive, additional modem, printer
Storage formats	FAT, FAT32, NTFS
Input/Output
Input	1 x Digital Input, 0 – 6 V detected as logic low, 8 – 30 V detected as logic high
Output	1 x Digital Output, Open collector output, max output 30 V, 300 mA
Events	Email, RMS
I/O Juggler	Allows to set certain I/O conditions to initiate event
Power
Connector	4 pin industrial DC power socket
Input voltage range	9 – 50VDC, reverse polarity protection, voltage surge/transient protection
PoE(passive)	Passive PoE via LAN port, not compatible with IEEE 802.3af, 802.3at, and 802.3bt standards
Power consumption	6W Max
Physical Interfaces (Ports, LEDs, Buttons)
Ethernet	4 x RJ45 ports, 10/100/1000 Mbps
I/Os	1 x Digital Input, 1 x Digital Output on 4 pin power connector
Status LEDs	8 x LAN status LEDs, 1 x Power LED
Power	1 x 4 pin DC connector
USB	1 x USB A port for external devices
Reset	Reboot/User default reset/Factory reset button
Other	1 x Grounding screw
Physical Specification
Casing Material	Aluminium housing with DIN rail mounting option
Dimensions(W x H x D)	115 x 32.2 x 95.2 mm
Weight	345 g
Mounting options	DIN rail, flat surface placement
Operating Environment
Operating Temperature	-40°C to 75°C
Operating Humidity	10% to 90% non-condensing
Ingress Protection Rating	IP30
Regulatory and Type Approvals
Regulatory and Type Approvals	CE, RoHS, REACH
EMI Immunity
Standards	EN 55032:2015, EN 55035:2017
ESD	EN 61000-4-2:2009
RS	EN 61000-4-3:2006+A1:2008+A2:2010
EFT	EN 61000-4-4:2012
Surge Protection	EN 61000-4-5:2014
CS	EN 61000-4-6:2014
DIP	EN 61000-4-11:2004
Safety
Standards	IEC 62368-1:2014 EN 62368-1:2014+A11:2017