CyberPower PR1500ERT2U uninterruptible power supply (UPS) Line-Interactive 1.5 kVA 1500 W 10 AC outlet(s)

Write a review below |
5/5
SKU: PR1500ERT2U

Excl. VAT: £518.38
Incl. VAT: £622.05

DISCOUNTED QUOTE

Want it by Tomorrow? Order before 4:00 PM for Next Business Day Delivery.


Availability

In stock

Condition New

In stock

    DISCOUNTED QUOTE

    Fill in the details below for discounted price

    CyberPower Professional Rackmount PR1500ERT2U Line-interactive UPS – 1.50 kVA/1.50 kW – 2U Rack/Tower – 3 Hour Recharge – 6 Minute Stand-by – 230 V AC Input – 230 V AC Output – 10 x IEC 60320 C13

    CyberPower PR1500ERT2U Line-Interactive UPS, with seamless Pure Sine Wave, provides the best power protection available for office system devices including PCs, workstations, networking devices, and peripherals. It’s typically integrated in the back office, server room, and data center environment. The rackmount / tower convertible design gives it enhanced flexibility for installation and operation in almost any environment. Multiple UPS systems can be connected to a single main Emergency Power Off (EPO) switch. In the event of an emergency, the UPS systems can be shut down immediately with the EPO button. As for battery maintenance, the UPS allows battery hot-swapping, which enables users to perform normal battery maintenance without significant interruption.

    Critical/Noncritical Load Outlets

    By dividing the outlets according to the importance of the connected loads, users are offered the flexibility to wisely manage the limited battery power during the event of power outage. In the state of a power failure, the UPS battery power can be preserve by terminating the power provided to the non-critical outlets, sparing the power to allow more runtime for critical loads to perform graceful shutdown.

    Heavy-duty Rackmount Rails Included

    The adjustable rackmount rails are engineered to facilitate the rack mounting of UPS or battery modules and support heavy UPS systems. Installation is quick and easy and required mounting hardware is included.

    Sturdy Rackmount Ears Included

    The rackmount ears are included for flexible rack mounting of UPS or battery modules. For some rack/tower convertible models, the ears also serve as supporting stands to provide stability and keep the unit upright. Installation is quick and easy and required mounting hardware is included.

    • Experience higher efficiency with lower energy cost
    • IEC 60320 C14 plug/connector type for maximum usability with added reliability
    • IEC 60320 C13 receptacle type offers maximum safety, convenience, and increased usability
    • Line-interactive UPS with server application/usage to ensure maximum usability and reliable power supply
    • 230 V AC input voltage for better reliance and maximum dependability
    • 230 V AC output voltage for maximum dependability and added productivity
    • 3 Hour typical battery recharge time for better convenience and prolonged, productive usage
    • Up to 6 minute runtime on full load to preserve critical data from power shortage interruptions
    • 1.50 kVA load capacity – work without any interruption during power outages
    • Prevent critical data loss by staying powered during a blackout with up to 1.50 kW load capacity

    Critical/Noncritical Load Outlets

    By dividing the outlets according to the importance of the connected loads, users are offered the flexibility to wisely manage the limited battery power during the event of power outage. In the state of a power failure, the UPS battery power can be preserve by terminating the power provided to the non-critical outlets, sparing the power to allow more runtime for critical loads to perform graceful shutdown.

    Heavy-duty Rackmount Rails Included

    The adjustable rackmount rails are engineered to facilitate the rack mounting of UPS or battery modules and support heavy UPS systems. Installation is quick and easy and required mounting hardware is included.

    Sturdy Rackmount Ears Included

    The rackmount ears are included for flexible rack mounting of UPS or battery modules. For some rack/tower convertible models, the ears also serve as supporting stands to provide stability and keep the unit upright. Installation is quick and easy and required mounting hardware is included.

    Specifications

    Power
    Output power factor 1
    Output power 1500 W
    Input operation voltage (min) 159 V
    Input operation voltage (max) 288 V
    Output operation voltage (min) 220 V
    Output operation voltage (max) 240 V
    Surge energy rating 2430 J
    Maximum current 10 A
    Emergency Power Off (EPO) Yes
    Output power capacity 1.5 kVA
    Power Factor Correction (PFC) type Active
    Ports & interfaces
    Cable length 3.05 m
    Emergency Power Off (EPO) connector Yes
    USB port Yes
    Serial interface Yes
    Serial interface type RS-232
    AC outlets quantity 10 AC outlet(s)
    AC outlet types C13 coupler
    Power plug C14 coupler
    USB 2.0 ports quantity 1
    Serial ports quantity 1
    RS-232 ports 1
    Ethernet LAN (RJ-45) ports 2
    Battery
    Battery type RBP0129
    Number of batteries supported 1
    Battery technology Sealed Lead Acid (VRLA)
    Battery recharge time 3 h
    Typical backup time at half load 18.6 min
    Typical backup time at full load 6 min
    Hot-swap battery Yes
    Performance
    Audible alarm modes Alarm when on battery, Fault, Low battery alarm, Overload alarm
    UPS topology Line-Interactive
    Waveform Pure sine
    Automatic Voltage Regulation (AVR) Yes
    Number of output phases 1
    Number of input phases 1
    Response time 4 ms
    LED indicators Fault, Power, Status
    EMI/RFI noise filtering Yes
    Surge protection Yes
    Surge protection features Network
    Power protection features Overload
    Noise level 52.5 dB
    Audible alarm(s) Yes
    Features
    Output frequency 50/60 Hz
    Management protocols SNMP/HTTP
    Country of origin China
    Audible alarm modes Alarm when on battery, Fault, Low battery alarm, Overload alarm
    UPS topology Line-Interactive
    Waveform Pure sine
    Automatic Voltage Regulation (AVR) Yes
    Number of output phases 1
    Number of input phases 1
    Output power factor 1
    Response time 4 ms
    Output power 1500 W
    Input operation voltage (min) 159 V
    Input operation voltage (max) 288 V
    Output operation voltage (min) 220 V
    Output operation voltage (max) 240 V
    Surge energy rating 2430 J
    Maximum current 10 A
    EMI/RFI noise filtering Yes
    Surge protection Yes
    Surge protection features Network
    Emergency Power Off (EPO) Yes
    Power protection features Overload
    Noise level 52.5 dB
    Audible alarm(s) Yes
    Output power capacity 1.5 kVA
    Power Factor Correction (PFC) type Active
    Input frequency 50/60 Hz
    Heat dissipation 75.1 BTU/h
    Design
    Country of origin China
    Rack capacity 2U
    Form factor Rackmount/Tower
    LED indicators Fault, Power, Status
    Product colour Black
    Cooling type Active
    Cable length 3.05 m
    Built-in fan Yes
    Housing material Metal
    Control type Buttons
    Display type LCD
    Operational conditions
    Operating temperature (T-T) 0 – 40 °C
    Storage temperature (T-T) -15 – 45 °C
    Operating relative humidity (H-H) 0 – 95%
    Storage relative humidity (H-H) 0 – 95%
    Operating altitude 0 – 3000 m
    Non-operating altitude 0 – 15000 m
    Technical details
    Output frequency 50/60 Hz
    Sustainability compliance Yes
    Harmonized System (HS) code 8504408590
    Warranty period 3 year(s)
    Compliance certificates RoHS
    Management features
    Management protocols SNMP/HTTP
    Cooling
    Cooling type Active
    Built-in fan Yes
    Weight & dimensions
    Package width 560 mm
    Package depth 530 mm
    Package height 275 mm
    Weight 29.4 kg
    Width 433 mm
    Package weight 31.2 kg
    Height 86.5 mm
    Depth 412 mm
    Packaging data
    Cables included Serial, USB cable
    Rack mount kit Yes
    Manual Yes
    Package width 560 mm
    Package depth 530 mm
    Package height 275 mm
    Package weight 31.2 kg
    Logistics data
    Harmonized System (HS) code 8504408590
    Other features
    Battery type RBP0129
    Packaging content
    Cables included Serial, USB cable
    Rack mount kit Yes
    Manual Yes

    Reviews

    There are no reviews yet.

    Be the first to review “CyberPower PR1500ERT2U uninterruptible power supply (UPS) Line-Interactive 1.5 kVA 1500 W 10 AC outlet(s)”

    Your email address will not be published. Required fields are marked *

    You have to be logged in to be able to add photos to your review.

    BESTSELLER PRODUCTS