HPE Aruba 2930F 48G PoE+ 4SFP+ Switch (JL256A)

Write a review below |
5/5
SKU: JL256A

Call For Price

DISCOUNTED QUOTE

Want it by Tomorrow? Order before 4:00 PM for Next Business Day Delivery.


Availability

Out of stock

Condition New

Out of stock

    DISCOUNTED QUOTE

    Fill in the details below for discounted price

    HPE Aruba 2930F 48G PoE+ 4SFP+ Switch (JL256A)

    Specifications

    Management features
    Multicast support Yes
    Switch type Managed
    Web-based management Yes
    Quality of Service (QoS) support Yes
    Switch layer L3
    Virtual LAN features
    VLAN support Yes
    Virtual LAN features Private VLAN
    IPv4 & IPv6 features
    IPv4 & IPv6 features IPv4/IPv6 access-control list (ACL)
    Performance
    Packet buffer memory 12.38 MB
    Stackable Yes
    Virtual stacking (units) 8
    Processor frequency 1016 MHz
    Memory type DDR3-SDRAM
    Internal memory 1024 MB
    Flash memory 4096 MB
    Built-in processor Yes
    Processor model ARM Cortex-A9
    Technical details
    Virtual stacking (units) 8
    Form factor 1U
    Stackable Yes
    Processor frequency 1016 MHz
    Rack mounting Yes
    Built-in processor Yes
    Ports & interfaces
    SFP+ module slots quantity 4
    Basic switching RJ-45 Ethernet ports quantity 48
    Basic switching RJ-45 Ethernet ports type Gigabit Ethernet (10/100/1000)
    Console port RJ-45/micro-USB
    Network
    Auto-sensing Yes
    Networking standards IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.1s, IEEE 802.1v, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3af, IEEE 802.3at, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x
    Full duplex Yes
    VLAN support Yes
    Spanning tree protocol Yes
    Rate limiting Yes
    Link aggregation Yes
    Auto MDI/MDI-X Yes
    10G support Yes
    Half duplex Yes
    Virtual LAN features Private VLAN
    Data transmission
    Throughput 112 Mpps
    Latency (1 Gbps) 3.8 µs
    Latency (10 Gbps) 1.6 µs
    Packet buffer memory 12.38 MB
    MAC address table 32768 entries
    Switching capacity 176 Gbit/s
    Security
    Authentication MAC-based authentication, Web-based authentication
    SSH/SSL support Yes
    Access Control List (ACL) Yes
    Authentication type RADIUS, TACACS+
    Multicast features
    Multicast support Yes
    Protocols
    Management protocols SNMPv1, SNMPv2, SNMPv3, Telnet, RMON1, FTP
    Routing protocols RIPng, VRRP
    IPv4 & IPv6 features IPv4/IPv6 access-control list (ACL)
    Memory
    Packet buffer memory 12.38 MB
    Memory type DDR3-SDRAM
    Internal memory 1024 MB
    Flash memory 4096 MB
    Design
    Form factor 1U
    Stackable Yes
    Rack mounting Yes
    Airflow direction Side-to-side airflow
    Power
    Power consumption (max) 459 W
    Power supply included Yes
    AC input voltage 100 – 240 V
    AC input frequency 50/60 Hz
    Power source AC
    Power over Ethernet (PoE)
    Total Power over Ethernet (PoE) budget 370 W
    Power over Ethernet (PoE) Yes
    Operational conditions
    Storage temperature (T-T) -40 – 70 °C
    Storage relative humidity (H-H) 15 – 95%
    Operating temperature (T-T) 0 – 45 °C
    Operating relative humidity (H-H) 15 – 95%
    Heat dissipation 293 BTU/h
    Weight & dimensions
    Width 442.5 mm
    Depth 304.2 mm
    Height 43.9 mm
    Weight 4.49 kg

    Reviews

    There are no reviews yet.

    Be the first to review “HPE Aruba 2930F 48G PoE+ 4SFP+ Switch (JL256A)”

    Your email address will not be published. Required fields are marked *

    You have to be logged in to be able to add photos to your review.

    BESTSELLER PRODUCTS