Tycon 4 Port 90W Managed Gigabit BT PoE Switch + 2 SFP (TP-SW4GBT-2SFP)

SKU: TP-SW4GBT-2SFP

Returns

14 day refund/replacements

Payments

Secure Transactions

Support

Live chat Support

Brand Tycon
Product Type Managed Gigabit BT PoE Switch
Ports 4 Ports 802.3af/at/bt, PoE++ (90W)
2 SFP/LC 2.5Gigabit Fiber Ports
1 Console Port
Ethernet transmission speed 10/100/1000Mbps Auto-negotiation
Fiber transceiver compatibility 155M/1.25G/2.5G Multi Mode or Single Mode
Connections Shielded RJ45, Shielded SFP/LC, Grounded to Case
Power input Vin 48VDC to 57VDC on dual input wire terminal (max wire size 12AWG)
Power consumption < 5 watts typical
Surge protection 6KV normal mode, 2KV differential mode
ESD protection 15KV air, 8KV touch
Management methods Web, CLI, Telnet, SSH, SNMP
VLANs Supports up to 4K VLANs simultaneously, port-based VLAN, 802.1Q tag-based VLAN
Port management Enable/disable port, speed duplex, MTU setting, flow control, mirroring, in/out direction, speed limit, isolation settings, unknown unitcast/multicast/broadcast storm supression
STP Standard spanning tree (STP) 802.1d, Rapid spanning tree (RSTP) 802.1w, Multiple spanning tree (MSTP) 802.1s
Ring network protocol ERPS (Ethernet Ring Protection Switching)
Link Aggregation Static/manual aggregation, LACP dynamic convergence
IGMP v1/v2/v3 snooping IGMP limits bandwidth intensive multicast traffic to only the required requester; supports 256 multicast groups
MAC management Add/delete, MAC address learning limit, dynamic ageing time setting
Layer 3 switching functions Virtual VLAN interface, ARP, static router
ACL (Access Control List) Based on source MAC, destination MAC, protocol type, source IP, destination IP, L4 port number; supports time-range time management
QOS (Quality Of Service) 802.1p(COS) Classification, DSCP Classification, Source IP/Destination IP/Port Number Classification
Supports SP/WRR/DRR Scheduling Strategy and Traffic Speed Limit (CAR)
Anti-Attack support DOS defence, CPU protection, limit message send rate, ARP Biding (IP, MAC, PORT)
Other Functions LLDP, add/delete users, log user login/operation/status/events, port security (dying gasp/SNMP trap), device reset, configuration save/restore, NTP time setting, upgrade management
Jumbo frame support 9.6k
Switching capacity 18 Gbps
Packet forwarding rate 13.39Mpps
Forwarding mode Store and forward
Package cache 4M
RAM/Flash 128MB/16MB
Address Table 8k MAC, self-learning
Network protocols and standards summary IEEE 802.3i 10BASET, 802.3u 100BASET, 802.3z 1000BASET, 802.3x Flow Control, 802.3ab Gigabit Media Independent Interface (GMII), 802.1q VLANs, 802.1p (QOS), 802.3ad Link Aggregation Control Protocol (LACP), 802.3af/at/bt (PoE), 802.3az Energy-Saving, IEEE G.8032 Ethernet ring protection (<50ms), (STP) 802.1d, (RSTP) 802.1w, (MSTP) 802.1s
Other industry standards EMI: FCC Part 15, CISPR (EN55032) class A, EMS: EN61000-4-2 (ESD), EN61000-4-4 (EFT), EN-61000-4-5 (Surge), Shock: IEC 60068-2-27, Free Fall: IEC 60068-2-32, Vibration: IEC 60068-2-6
Environmental protection IP40
Operating temperature -40°C to +85°C
Operating humidity 5%-95% (non condensing)
Storage temperature -40°C to +85°C
MTBF 100,000 hours
Certifications CE, FCC< RoHS
Dimensions (L x W x H) 155 x 117 x 38 mm
Weight 600g

Buy new:

Excl. VAT: £274.00
Incl. VAT: £328.80

Delivery Date:

Monday, May 18

Order Within:

Loading timer...

Deliver to:

4 In Stock

4 In Stock

Secure Payment method

Returns

14 day refund/replacements

Payments

Secure Transactions

Support

Live chat Support

Not Sure How this Product will Suit You?

[product_pdf]

Tycon 4 Port 90W Managed Gigabit BT PoE Switch + 2 SFP (TP-SW4GBT-2SFP)

SKU: TP-SW4GBT-2SFP
Brand Tycon
Product Type Managed Gigabit BT PoE Switch
Ports 4 Ports 802.3af/at/bt, PoE++ (90W)
2 SFP/LC 2.5Gigabit Fiber Ports
1 Console Port
Ethernet transmission speed 10/100/1000Mbps Auto-negotiation
Fiber transceiver compatibility 155M/1.25G/2.5G Multi Mode or Single Mode
Connections Shielded RJ45, Shielded SFP/LC, Grounded to Case
Power input Vin 48VDC to 57VDC on dual input wire terminal (max wire size 12AWG)
Power consumption < 5 watts typical
Surge protection 6KV normal mode, 2KV differential mode
ESD protection 15KV air, 8KV touch
Management methods Web, CLI, Telnet, SSH, SNMP
VLANs Supports up to 4K VLANs simultaneously, port-based VLAN, 802.1Q tag-based VLAN
Port management Enable/disable port, speed duplex, MTU setting, flow control, mirroring, in/out direction, speed limit, isolation settings, unknown unitcast/multicast/broadcast storm supression
STP Standard spanning tree (STP) 802.1d, Rapid spanning tree (RSTP) 802.1w, Multiple spanning tree (MSTP) 802.1s
Ring network protocol ERPS (Ethernet Ring Protection Switching)
Link Aggregation Static/manual aggregation, LACP dynamic convergence
IGMP v1/v2/v3 snooping IGMP limits bandwidth intensive multicast traffic to only the required requester; supports 256 multicast groups
MAC management Add/delete, MAC address learning limit, dynamic ageing time setting
Layer 3 switching functions Virtual VLAN interface, ARP, static router
ACL (Access Control List) Based on source MAC, destination MAC, protocol type, source IP, destination IP, L4 port number; supports time-range time management
QOS (Quality Of Service) 802.1p(COS) Classification, DSCP Classification, Source IP/Destination IP/Port Number Classification
Supports SP/WRR/DRR Scheduling Strategy and Traffic Speed Limit (CAR)
Anti-Attack support DOS defence, CPU protection, limit message send rate, ARP Biding (IP, MAC, PORT)
Other Functions LLDP, add/delete users, log user login/operation/status/events, port security (dying gasp/SNMP trap), device reset, configuration save/restore, NTP time setting, upgrade management
Jumbo frame support 9.6k
Switching capacity 18 Gbps
Packet forwarding rate 13.39Mpps
Forwarding mode Store and forward
Package cache 4M
RAM/Flash 128MB/16MB
Address Table 8k MAC, self-learning
Network protocols and standards summary IEEE 802.3i 10BASET, 802.3u 100BASET, 802.3z 1000BASET, 802.3x Flow Control, 802.3ab Gigabit Media Independent Interface (GMII), 802.1q VLANs, 802.1p (QOS), 802.3ad Link Aggregation Control Protocol (LACP), 802.3af/at/bt (PoE), 802.3az Energy-Saving, IEEE G.8032 Ethernet ring protection (<50ms), (STP) 802.1d, (RSTP) 802.1w, (MSTP) 802.1s
Other industry standards EMI: FCC Part 15, CISPR (EN55032) class A, EMS: EN61000-4-2 (ESD), EN61000-4-4 (EFT), EN-61000-4-5 (Surge), Shock: IEC 60068-2-27, Free Fall: IEC 60068-2-32, Vibration: IEC 60068-2-6
Environmental protection IP40
Operating temperature -40°C to +85°C
Operating humidity 5%-95% (non condensing)
Storage temperature -40°C to +85°C
MTBF 100,000 hours
Certifications CE, FCC< RoHS
Dimensions (L x W x H) 155 x 117 x 38 mm
Weight 600g
Description

Tycon 4 Port 90W Managed Gigabit BT PoE Switch + 2 SFP (TP-SW4GBT-2SFP)

Tycon 4 Port 90W Managed Gigabit BT PoE Switch + 2 SFP – TP-SW4GBT-2SFP

Brand Tycon
Product Type Managed Gigabit BT PoE Switch
Ports 4 Ports 802.3af/at/bt, PoE++ (90W)
2 SFP/LC 2.5Gigabit Fiber Ports
1 Console Port
Ethernet transmission speed 10/100/1000Mbps Auto-negotiation
Fiber transceiver compatibility 155M/1.25G/2.5G Multi Mode or Single Mode
Connections Shielded RJ45, Shielded SFP/LC, Grounded to Case
Power input Vin 48VDC to 57VDC on dual input wire terminal (max wire size 12AWG)
Power consumption < 5 watts typical
Surge protection 6KV normal mode, 2KV differential mode
ESD protection 15KV air, 8KV touch
Management methods Web, CLI, Telnet, SSH, SNMP
VLANs Supports up to 4K VLANs simultaneously, port-based VLAN, 802.1Q tag-based VLAN
Port management Enable/disable port, speed duplex, MTU setting, flow control, mirroring, in/out direction, speed limit, isolation settings, unknown unitcast/multicast/broadcast storm supression
STP Standard spanning tree (STP) 802.1d, Rapid spanning tree (RSTP) 802.1w, Multiple spanning tree (MSTP) 802.1s
Ring network protocol ERPS (Ethernet Ring Protection Switching)
Link Aggregation Static/manual aggregation, LACP dynamic convergence
IGMP v1/v2/v3 snooping IGMP limits bandwidth intensive multicast traffic to only the required requester; supports 256 multicast groups
MAC management Add/delete, MAC address learning limit, dynamic ageing time setting
Layer 3 switching functions Virtual VLAN interface, ARP, static router
ACL (Access Control List) Based on source MAC, destination MAC, protocol type, source IP, destination IP, L4 port number; supports time-range time management
QOS (Quality Of Service) 802.1p(COS) Classification, DSCP Classification, Source IP/Destination IP/Port Number Classification
Supports SP/WRR/DRR Scheduling Strategy and Traffic Speed Limit (CAR)
Anti-Attack support DOS defence, CPU protection, limit message send rate, ARP Biding (IP, MAC, PORT)
Other Functions LLDP, add/delete users, log user login/operation/status/events, port security (dying gasp/SNMP trap), device reset, configuration save/restore, NTP time setting, upgrade management
Jumbo frame support 9.6k
Switching capacity 18 Gbps
Packet forwarding rate 13.39Mpps
Forwarding mode Store and forward
Package cache 4M
RAM/Flash 128MB/16MB
Address Table 8k MAC, self-learning
Network protocols and standards summary IEEE 802.3i 10BASET, 802.3u 100BASET, 802.3z 1000BASET, 802.3x Flow Control, 802.3ab Gigabit Media Independent Interface (GMII), 802.1q VLANs, 802.1p (QOS), 802.3ad Link Aggregation Control Protocol (LACP), 802.3af/at/bt (PoE), 802.3az Energy-Saving, IEEE G.8032 Ethernet ring protection (<50ms), (STP) 802.1d, (RSTP) 802.1w, (MSTP) 802.1s
Other industry standards EMI: FCC Part 15, CISPR (EN55032) class A, EMS: EN61000-4-2 (ESD), EN61000-4-4 (EFT), EN-61000-4-5 (Surge), Shock: IEC 60068-2-27, Free Fall: IEC 60068-2-32, Vibration: IEC 60068-2-6
Environmental protection IP40
Operating temperature -40°C to +85°C
Operating humidity 5%-95% (non condensing)
Storage temperature -40°C to +85°C
MTBF 100,000 hours
Certifications CE, FCC< RoHS
Dimensions (L x W x H) 155 x 117 x 38 mm
Weight 600g
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Tycon 4 Port 90W Managed Gigabit BT PoE Switch + 2 SFP (TP-SW4GBT-2SFP)”

Your email address will not be published. Required fields are marked *

You have to be logged in to be able to add photos to your review.

Buy new:

Excl. VAT: £274.00
Incl. VAT: £328.80

Delivery Date:

Monday, May 18

Dispatch time:

Loading timer...

Delivery Date & Time for:

4 In Stock

4 In Stock

Returns

14 days return/refund

Support

Payment

Secure transaction

Secure Payment method
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Tycon 4 Port 90W Managed Gigabit BT PoE Switch + 2 SFP (TP-SW4GBT-2SFP)”

Your email address will not be published. Required fields are marked *

You have to be logged in to be able to add photos to your review.

Description

Tycon 4 Port 90W Managed Gigabit BT PoE Switch + 2 SFP (TP-SW4GBT-2SFP)

Tycon 4 Port 90W Managed Gigabit BT PoE Switch + 2 SFP – TP-SW4GBT-2SFP

Brand Tycon
Product Type Managed Gigabit BT PoE Switch
Ports 4 Ports 802.3af/at/bt, PoE++ (90W)
2 SFP/LC 2.5Gigabit Fiber Ports
1 Console Port
Ethernet transmission speed 10/100/1000Mbps Auto-negotiation
Fiber transceiver compatibility 155M/1.25G/2.5G Multi Mode or Single Mode
Connections Shielded RJ45, Shielded SFP/LC, Grounded to Case
Power input Vin 48VDC to 57VDC on dual input wire terminal (max wire size 12AWG)
Power consumption < 5 watts typical
Surge protection 6KV normal mode, 2KV differential mode
ESD protection 15KV air, 8KV touch
Management methods Web, CLI, Telnet, SSH, SNMP
VLANs Supports up to 4K VLANs simultaneously, port-based VLAN, 802.1Q tag-based VLAN
Port management Enable/disable port, speed duplex, MTU setting, flow control, mirroring, in/out direction, speed limit, isolation settings, unknown unitcast/multicast/broadcast storm supression
STP Standard spanning tree (STP) 802.1d, Rapid spanning tree (RSTP) 802.1w, Multiple spanning tree (MSTP) 802.1s
Ring network protocol ERPS (Ethernet Ring Protection Switching)
Link Aggregation Static/manual aggregation, LACP dynamic convergence
IGMP v1/v2/v3 snooping IGMP limits bandwidth intensive multicast traffic to only the required requester; supports 256 multicast groups
MAC management Add/delete, MAC address learning limit, dynamic ageing time setting
Layer 3 switching functions Virtual VLAN interface, ARP, static router
ACL (Access Control List) Based on source MAC, destination MAC, protocol type, source IP, destination IP, L4 port number; supports time-range time management
QOS (Quality Of Service) 802.1p(COS) Classification, DSCP Classification, Source IP/Destination IP/Port Number Classification
Supports SP/WRR/DRR Scheduling Strategy and Traffic Speed Limit (CAR)
Anti-Attack support DOS defence, CPU protection, limit message send rate, ARP Biding (IP, MAC, PORT)
Other Functions LLDP, add/delete users, log user login/operation/status/events, port security (dying gasp/SNMP trap), device reset, configuration save/restore, NTP time setting, upgrade management
Jumbo frame support 9.6k
Switching capacity 18 Gbps
Packet forwarding rate 13.39Mpps
Forwarding mode Store and forward
Package cache 4M
RAM/Flash 128MB/16MB
Address Table 8k MAC, self-learning
Network protocols and standards summary IEEE 802.3i 10BASET, 802.3u 100BASET, 802.3z 1000BASET, 802.3x Flow Control, 802.3ab Gigabit Media Independent Interface (GMII), 802.1q VLANs, 802.1p (QOS), 802.3ad Link Aggregation Control Protocol (LACP), 802.3af/at/bt (PoE), 802.3az Energy-Saving, IEEE G.8032 Ethernet ring protection (<50ms), (STP) 802.1d, (RSTP) 802.1w, (MSTP) 802.1s
Other industry standards EMI: FCC Part 15, CISPR (EN55032) class A, EMS: EN61000-4-2 (ESD), EN61000-4-4 (EFT), EN-61000-4-5 (Surge), Shock: IEC 60068-2-27, Free Fall: IEC 60068-2-32, Vibration: IEC 60068-2-6
Environmental protection IP40
Operating temperature -40°C to +85°C
Operating humidity 5%-95% (non condensing)
Storage temperature -40°C to +85°C
MTBF 100,000 hours
Certifications CE, FCC< RoHS
Dimensions (L x W x H) 155 x 117 x 38 mm
Weight 600g

BESTSELLER PRODUCTS

Reviews

WHAT OUR CLIENTS ARE SAYING

Don't Just Take our Words for it. Here's What Some of Our Customers have to say about their experiences about T.I Digital Solution LTD